Can You Install New Flooring Over Existing Floors?

) with the structural markup STRIPPED OUT. The gf-blog wrapper div was gone, so every rule in the stylesheet, which is scoped to .gf-blog, applied to nothing. Also missing: all card divs, all table classes, the mobile stacked-card markup, both JSON-LD scripts, and the backslashes in two CSS content escapes. The same damage is live right now on the production page, where each table is followed by a full duplicate of its own contents as loose prose (“Floating LVPYes. Fill joints wider than 1/4 inch”) and the CTA reads “Lifetime Installation WarrantyCall 844-466-0293”. This file is a REBUILD from the surviving prose, not an edit of that export. Replace the post body with this file in full. ————————————————————————— LIVE URL ………. https://goflooring.com/learn-about-flooring/can-you-install-new-flooring-over-existing-floors/ Fetched 2026-09-11. NOTE: the supplied header said the slug was flooring-over-existing-floors and gave a canonical of /learn-about-flooring/flooring-over-existing-floors/. That URL 404s. The real slug is can-you-install-new-flooring-over-existing-floors (49 chars). Canonical and schema now match the live URL. POST TITLE (H1) … Can You Install New Flooring Over Existing Floors? (unchanged) SEO TITLE ……… Flooring Over Existing Floors: 8 Substrates Compared (52 chars) Reworded 2026-09-11: Rank Math flagged that the title had no number. Keyphrase still leads the title. META DESCRIPTION .. Floating LVP or laminate over existing floors usually works on sound tile. Over carpet or a floating floor, never. Substrate by substrate, with the numbers. (156 chars) LIVE PAGE BUG: the current meta description, og:description and twitter:description are all the BYLINE TEXT (“By Brooke Davis – Updated August 2026 – 11 min read”). No description was ever saved in Rank Math. Enter this one. FOCUS KEYPHRASE … over existing floors (3 words, present in the H1, the slug, the SEO title and the first paragraph. The supplied “install flooring over existing floor” is 5 words and doc 06 caps keyphrases at 3.) SECONDARY ……… flooring over existing floors, install flooring over existing floor, can you install LVP over tile, laminate over ceramic tile, flooring over carpet, tile over tile CATEGORY ………. Learn About Flooring (the supplied header said “Installation”; the live post is filed under Learn About Flooring and the schema articleSection matches that) AUTHOR ………… Brooke Davis (/author/brooke/) WHAT WAS REBUILT 1. STRUCTURE. gf-blog wrapper, byline class, Quick Answer, Key Notes, verdict strip, TOC, both tables with their mobile stacked-card equivalents, two CTA cards, contractor warning, four rec cards, FAQ block, trust block. Inline styles applied to every card component per the WordPress theme-override rule. 2. BOTH JSON-LD BLOCKS REBUILT from scratch (Article + FAQPage). Neither existed in the supplied file. All 8 FAQ answers are byte-identical between the visible HTML and the schema. 3. CSS ESCAPES FIXED. content: “25B8” -> “25B8” and “2713” -> “2713”. As supplied, the TOC bullets and CTA checkmarks would have printed the literal text 25B8 and 2713. 4. MOBILE/THEME HARDENING BLOCK added, including the pointer-type table swap and doubled-class rules for the verdict strip and image grid. WHAT CHANGED IN THE CONTENT 5. LINKS ADDED, all fetched live 2026-09-11, none nofollow. 8 internal, 5 external. The supplied file had zero links of either kind. 6. UNVERIFIABLE MATERIAL REMOVED: the Marcus O. “Verified Customer Review” (same pattern as the reviews pulled from three other posts this week), the Atlanta metro dishwasher job, and “more Charlotte and Raleigh homes than we can count”. The dishwasher point survives as a general clearance warning, which is what made it useful. 7. NAMED-BRAND INSTRUCTION CLAIMS GENERALISED. The supplied copy attributed specific spec numbers to Shaw, Mohawk and COREtec by name in 11 places. Doc 01 bans naming mills in visible copy (this is the same rule that drove revision 3 of the carpet fibers post). The specs are kept as industry ranges; the brand attributions are gone. See VERIFY below. 8. PRICING LANGUAGE: “cheaper than modifying cabinetry” -> “a smaller job than”. 9. Service area 6 -> 8 states (NC, SC, GA, FL, AL, MI, IN, OH). 10. Captions removed per the 2026-09-10 standing rule. Image alt text rewritten to describe the material, not the room. 11. H2 “The Substrate Matrix” and the FAQ heading now carry the keyphrase. 12. Byline: Updated September 2026, 23 min read. CONFLICTS FOR BROOKE C1. FEATURED IMAGE. The live og:image is fresh-take-room-02.jpg, but no featured image is set on the post, so the theme banner is empty and the in-body hero is doing the work. The schema image is the in-body hero (AdobeStock_423612697). Either set that file as the featured image AND delete the in-body hero from this file, or leave the hero and point og:image at it. Do not leave the two disagreeing. C2. FOUR IMAGES MAY BE BROKEN. On the live page the tile, carpet, installer, hardwood and threshold images all render with an empty src. That may be lazy-loading in the fetch rather than a real fault, but it matches the “broken images” pattern from the bedrooms rebuild. Open the page and confirm all six load before publish. C3. The supplied header’s OPEN ITEM 1 asked for real datePublished and dateModified. datePublished is now the live WordPress value. VERIFY BEFORE PUBLISH (category 3, external technical claims) – The flatness figures (3/16 in / 10 ft, 1/8 in / 6 ft, 1/4 in / 10 ft radius with 1/16 in under a 3 ft straightedge) and the 1/4 inch grout joint threshold. These were brand-attributed in the source and are now stated as industry ranges, so confirm the ranges hold across the products you sell. – NWFA joist-spacing subfloor table (5/8 / 3/4 / 7/8 nominal) and the 1/4 in over 10 ft nail-down tolerance with 1 1/2 in fasteners. – IRC R311.7.5.1 riser figures, ASTM F1869 / F2170 limits and probe counts, TCNA TR712 / TR713, CRI 105 tack strip dimensions, L/360 deflection. – “Presume it contains asbestos” is RFCI guidance. The EPA links carry the rest of the asbestos section. A live RFCI URL could not be confirmed, so that sentence is attributed to industry guidance rather than to RFCI by name. PRE-PUBLISH CHECKLIST 1. Replace the post body with this file in full (Custom HTML block). 2. Rank Math: SEO title, description, focus keyphrase. Open the full editor and Update so the score recalculates. 3. Resolve C1 (featured image vs in-body hero) and C2 (image src). 4. Disable the site-wide “Real Answers For Real Life” footer FAQ on this post, or two FAQPage blocks ship. It is live on this page now. 5. The footer FAQ also still advertises “0% interest until 2028” and a five-state service area on this page. Both are outside this file. 6. Purge WP Rocket, hard refresh, confirm the tables no longer duplicate. 7. Rich Results Test (Article + FAQPage), then Search Console URL Inspection. =========================================================================== –>
Open living room and kitchen with new flooring installed over existing floors

Quick Answer

It depends on what is already down. Floating LVP or laminate over existing floors works best when the old floor is sound, well bonded ceramic tile, with the grout joints filled and the surface inside flatness tolerance. Carpet, cushion backed sheet vinyl and existing floating floors always come out. Everything else depends on what a crew finds under the surface.

Key Notes

  • Flatness is the gate. Most floating floor instructions require 3/16 inch over 10 feet, or 1/8 inch over 6 feet. Some rigid vinyl instructions instead specify 1/4 inch over a 10 foot radius with 1/16 inch under a 3 foot straightedge.
  • Grout joints have a threshold. Rigid core LVP instructions commonly allow joints up to 1/4 inch wide. Laminate instructions typically require every joint filled flush with a Portland cement floor fill.
  • Height adds up fast. Floating LVP adds roughly 3/16 to 3/8 inch. Laminate adds 3/8 to 5/8 inch. Tile over tile adds 1/2 to 3/4 inch once the mortar bed is counted.
  • Stairs have a hard code limit. The IRC allows only 3/8 inch of variation between the tallest and shortest riser in a flight, so raising a landing surface can put a staircase out of compliance.
  • 3 substrates are never approved. Carpet and pad, cushion backed or perimeter glued sheet vinyl, and an existing floating floor. No prep changes any of the 3.
  • The warranty is the real risk. Installing over a substrate the manufacturer does not approve voids the product warranty on day 1, no matter how good the finished floor looks.
Usually Stays

Well bonded ceramic or porcelain tile. Sound hardwood. One fully adhered layer of existing sheet vinyl or vinyl tile.

Depends

Particleboard underlayment. Anything out of flatness tolerance. Any assembly where the finished height traps an appliance or a door.

Always Comes Out

Carpet and pad. Existing cushion backed or perimeter glued sheet vinyl. An existing floating laminate or LVP floor.

Table of Contents

  • Over Existing Floors: The Two Questions That Decide Everything
  • New Flooring Over Existing Floors: The Substrate Matrix
  • Over Ceramic Or Porcelain Tile: Usually Yes
  • Over Hardwood: Yes, At An Angle
  • Over An Existing Floating Floor: The Expensive Myth
  • Over Sheet Vinyl And Vinyl Tile: Test Before You Touch It
  • Over Carpet: Never
  • The Height Problem Nobody Budgets For
  • When Tearing Out Beats Building Up
  • Questions About Flooring Over Existing Floors

Over Existing Floors: The Two Questions That Decide Everything

The old floor is not really what is being judged when you build over existing floors. The assembly is. Every yes or no in this guide comes down to two questions a crew answers standing in the room with a straightedge and a moisture meter.

First: is the existing floor a stable, bonded, non compressible surface? A new floor transfers every footstep and every furniture leg straight down into whatever is beneath it. If that layer moves, compresses, or is only loosely stuck to the subfloor, the new floor fails from below. Click joints shear. Glue bonds release. Tile cracks along the weak line.

Second: does the finished height still work? Adding a floor on top of a floor raises the whole room. Doors, dishwashers, exterior thresholds, and stair risers do not move with it. This is the constraint that surprises homeowners most often, and it is the one that turns a simple job into a complicated one.

In our experience, rigid core LVP installed directly over 1990s ceramic performs exactly as specified. We have also walked into rooms where the tile looked fine until someone tapped it and half the field rang hollow. A photograph of your floor cannot answer either question. Only a hands-on look can.

Large format grey ceramic tile flooring installed across a residential interior Tile: Usually Stays
Light gray carpet flooring installed wall to wall in a residential bedroom Carpet: Always Comes Out

New Flooring Over Existing Floors: The Substrate Matrix

This is the substrate matrix for flooring over existing floors. Start with the row that matches what is on your floor right now, then follow it across to the material you want. The cells carry the actual condition, not a grade.

Existing Floor Floating LVP Floating Laminate Tile Nail Down Hardwood Carpet
Ceramic or porcelain tile, well bonded Yes. Fill joints wider than 1/4 inch Yes. Fill every joint flush Yes. Bond test first, TCNA methods TR712 and TR713 No. Nothing to fasten into Yes. Tack strip must be adhesive anchored
Solid or engineered hardwood, sound and flat Yes. Sand or plane high spots first Yes. Sand or plane high spots first Case by case. Framing must meet L/360 deflection Yes. Lay at 45 to 90 degrees to the existing boards Yes. Tack strip nails directly
Existing floating laminate or LVP No. Named a non approved substrate No. Same reason No. No rigid bond available No No. Nothing to anchor tack strip to
Sheet vinyl or vinyl tile, one layer, fully adhered Yes. One layer only, not cushioned Yes. One layer only Case by case. Bond test and abrasion required No. Fasteners will not hold in the adhesive layer Yes. Strip waxes, sealers and finishes first
Cushion backed or perimeter glued sheet vinyl No. Compressible substrate No. Compressible substrate No. Excluded by TCNA No No. Excluded by CRI 105
Carpet and pad No. Not allowed over any carpet No. Same restriction No No No. CRI 105 excludes carpet over carpet
Concrete slab, tested and dry Yes. 5 to 8 lb by ASTM F1869, 85 to 90 percent by ASTM F2170 Yes. Same moisture limits Yes. Crack isolation membrane where cracked No. Needs a wood subfloor or a sleeper system Yes. Adhesive anchored tack strip
Particleboard underlayment Case by case. Must be sound, dry and flat Case by case. Same conditions No. Not a bondable substrate No. NWFA does not accept it as underlayment Case by case. Fastener hold is unreliable

Every yes above assumes the finished assembly still meets the manufacturer’s flatness tolerance and that the added height clears doors, appliances and stairs.

Ceramic or porcelain tile, well bonded
Floating LVPYes. Fill joints wider than 1/4 inch
Floating LaminateYes. Fill every joint flush
TileYes. Bond test first, TCNA methods TR712 and TR713
Nail Down HardwoodNo. Nothing to fasten into
CarpetYes. Tack strip must be adhesive anchored
Solid or engineered hardwood, sound and flat
Floating LVPYes. Sand or plane high spots first
Floating LaminateYes. Sand or plane high spots first
TileCase by case. Framing must meet L/360 deflection
Nail Down HardwoodYes. Lay at 45 to 90 degrees to the existing boards
CarpetYes. Tack strip nails directly
Existing floating laminate or LVP
Floating LVPNo. Named a non approved substrate
Floating LaminateNo. Same reason
TileNo. No rigid bond available
Nail Down HardwoodNo
CarpetNo. Nothing to anchor tack strip to
Sheet vinyl or vinyl tile, one layer, fully adhered
Floating LVPYes. One layer only, not cushioned
Floating LaminateYes. One layer only
TileCase by case. Bond test and abrasion required
Nail Down HardwoodNo. Fasteners will not hold in the adhesive layer
CarpetYes. Strip waxes, sealers and finishes first
Cushion backed or perimeter glued sheet vinyl
Floating LVPNo. Compressible substrate
Floating LaminateNo. Compressible substrate
TileNo. Excluded by TCNA
Nail Down HardwoodNo
CarpetNo. Excluded by CRI 105
Carpet and pad
Floating LVPNo. Not allowed over any carpet
Floating LaminateNo. Same restriction
TileNo
Nail Down HardwoodNo
CarpetNo. CRI 105 excludes carpet over carpet
Concrete slab, tested and dry
Floating LVPYes. 5 to 8 lb by ASTM F1869, 85 to 90 percent by ASTM F2170
Floating LaminateYes. Same moisture limits
TileYes. Crack isolation membrane where cracked
Nail Down HardwoodNo. Needs a wood subfloor or a sleeper system
CarpetYes. Adhesive anchored tack strip
Particleboard underlayment
Floating LVPCase by case. Must be sound, dry and flat
Floating LaminateCase by case. Same conditions
TileNo. Not a bondable substrate
Nail Down HardwoodNo. NWFA does not accept it as underlayment
CarpetCase by case. Fastener hold is unreliable

Over Ceramic Or Porcelain Tile: Usually Yes

Of all the ways of going over existing floors, this is the one homeowners ask about most.

This is the single most common version of the question, and the answer is generally good news. Rigid core LVP and laminate both float, which means they are not fastened or glued to anything. They only need a flat, solid, dry surface to rest on. A well bonded tile floor is all three.

The conditions are specific, and they differ between the two materials. Rigid core vinyl instructions commonly allow the floor to run over grout joints up to 1/4 inch wide with no filling. Anything wider gets packed flush with a cementitious patching compound.

Laminate is stricter. Instructions typically call for every joint filled to the surface of the tile, regardless of width, because laminate’s locking edge is less forgiving of unsupported spans. Both the luxury vinyl plank and the laminate we install float, so both are candidates over sound tile.

Loose tile is the disqualifier. Our crews tap across the field with a hard object before anything else happens, and a hollow ring means that tile is not bonded to the slab or backer board underneath it. Debonded tiles either come out or get re-set. Skipping that check is how a brand new floor develops a soft, clicking spot six months later.

The Flatness Number That Actually Governs

Most floating floor instructions require the substrate to be flat within 3/16 inch over 10 feet, or 1/8 inch over 6 feet. Some rigid vinyl instructions use a different measure: 1/4 inch over a 10 foot radius, with no more than 1/16 inch under a 3 foot straightedge. Those are not interchangeable numbers, and the product in the box decides which one applies.

For nail down hardwood, the National Wood Flooring Association allows a looser tolerance of 1/4 inch over 10 feet when fasteners are 1 1/2 inches or longer. Glue down and floating hardwood tighten back to 3/16 inch over 10 feet. The mistake we see most often is a homeowner reading one number online and assuming it covers every product and every method.

Installer fitting floating floor planks together during a residential installation

Tile Over Tile Is Also On The Table

Setting new tile over old tile is permitted by the Tile Council of North America where there is no floor height or wall thickness limitation and the existing tile is well bonded. The relevant procedures in the TCNA Handbook for Ceramic, Glass, and Stone Tile Installation are methods TR712 and TR713.

Two cautions come with it. TCNA recommends a bond test first, because not every thin set, including polymer modified products, will bond directly to a glazed tile surface. Mechanical or chemical abrasion is often required to get a grip.

TCNA also advises running a toxic metals analysis before abrading an old glaze, since some older glazes contain lead, and using respiratory protection during the work. Beyond the surface, the framing itself has to carry the load. The working industry figure for ceramic and porcelain tile remains L/360 deflection measured before the tile underlayment goes in.

We Bring The Showroom To You

Find Out What Is Actually Under Your Floor

A Go Flooring consultant comes to your home, checks the existing floor for bond and flatness, measures the height you have to work with, and brings real samples of every material that fits the result. No showroom trip required.

  • Free In-Home Consultation
  • Subfloor And Substrate Check
  • Lifetime Installation Warranty
Call 844-466-0293

Over Hardwood: Yes, At An Angle

An existing solid wood floor is one of the better substrates in the house. It is rigid, it is fastened down, and it is already flat enough in most cases to take a floating floor with nothing more than a pass to knock down high spots.

Existing hardwood flooring running through a residential living room interior

New nail down hardwood over old hardwood is also permitted. The NWFA position is that wood flooring can be nailed to an existing flat, dry, structurally sound solid strip or plank floor by sanding high spots and laying the new floor at a 45 to 90 degree angle to the existing boards. The angle matters because fastening parallel to the old boards puts the new nails into the same seams and gaps repeatedly.

If the design calls for running parallel, an added underlayment of at least 3/8 inch, with 1/2 inch preferred, restores the freedom to run any direction. Which direction you run the new floor is a design decision as much as a technical one, and our guide to hardwood floor direction covers how it changes the way a room reads.

One correction worth making, because it circulates constantly: nail down hardwood does not universally require 3/4 inch plywood underneath. The requirement is set by joist spacing.

At 16 inches on center, nominal 5/8 inch CD Exposure 1 plywood is acceptable. Between 16 and 19.2 inches on center, the spec moves to nominal 3/4 inch tongue and groove. Between 19.2 and 24 inches, it moves again to nominal 7/8 inch tongue and groove plywood, nominal 1 inch OSB, or a two layer subfloor system. Particleboard is not an acceptable underlayment for nail down at any spacing.

Worth naming the alternative here. If the existing hardwood is structurally fine and only looks tired, sanding and refinishing it is a real option and often the better one. That is a job for a refinishing specialist rather than an installer. Go Flooring focuses on new installation when full replacement is the right call, and our flooring lifespan comparison by material sets out how many refinish cycles a floor has left in it.

Over An Existing Floating Floor: The Expensive Myth

This one produces more failed floors than any other assumption in the category. A floating floor is not a substrate. It is a free floating assembly that expands, contracts, and shifts slightly under load by design.

Manufacturers name floating floors and laminate directly on their non approved substrate lists for rigid vinyl plank, with the instruction to remove them and remove old adhesive before installing. The mechanism is simple: soft underlayment and soft substrates compromise the product’s locking ability.

Stack a second floating system on the first and you get compound movement, two independent expansion planes working against each other, and click joints taking stress they were never engineered for. The failure shows up as separated seams and peaking, usually within the first two seasonal humidity swings. It is the one case of flooring over existing floors where the finished job can look right on day 1 and still fail.

There is no prep that fixes this. The existing floating floor comes out. The upside is that it is the easiest tear out in the category, because nothing is glued or nailed down.

Over Sheet Vinyl And Vinyl Tile: Test Before You Touch It

One layer of fully adhered, non cushioned sheet vinyl or vinyl tile is an acceptable substrate for a floating floor. Two layers are not. Cushion backed and perimeter glued sheet vinyl are not, because both compress under point loads and shear the locking joints of whatever sits on top.

Older resilient flooring carries a second consideration that has nothing to do with performance.

Contractor Warning

Vinyl asbestos tile, classically in a 9 inch by 9 inch format, asphalt tile, sheet vinyl backing felt, and black asphaltic cutback adhesive can all contain asbestos. Industry guidance is blunt: unless you are positively certain a product is non asbestos containing, presume that it contains asbestos.

The EPA’s position is that asbestos containing material in good condition that will not be disturbed generally does not release fibers, and that improper removal can increase household exposure. Its homeowner guidance says not to sand or try to level asbestos flooring or its backing, and that when such flooring needs replacing you should install new floor covering over it where possible. Never run a power stripper over flooring that may contain asbestos.

Have suspect flooring sampled by a trained and accredited asbestos professional before any work starts. If removal is required, that work belongs to an accredited abatement contractor, and the EPA advises using separate firms for assessment and abatement so there is no conflict of interest. Asbestos abatement is not a service Go Flooring provides.

The EPA sets out the homeowner version of all of this in Protect Your Family from Exposures to Asbestos, and answers the testing question directly in its note on how to know whether floor tile contains asbestos. Both are worth reading before anyone lifts a corner.

Over Carpet: Never

Short section, because there is nothing to weigh. Carpet is the one substrate where flooring over existing floors is never an option. Rigid core instructions state that installation is not allowed over any type of carpet, and manufacturers list carpeting and carpet pad as non approved substrates. CRI 105, the Carpet and Rug Institute’s residential carpet installation standard, says carpet should not be installed over existing carpet either.

Carpet and pad compress by design. That is the entire product. Every step on a floor installed above it flexes the assembly, and a click joint that flexes eventually fails. The old carpet, the pad, and the tack strip all come out. If you are still deciding whether the carpet is finished, signs you need new carpet covers what to check first.

Before and after of a residential room, carpet replaced with luxury vinyl plank

Going the other direction, carpet over an existing hard surface is routine. CRI 105 calls for tack strip at least 1 inch wide and 1/4 inch thick with a minimum of two fasteners per piece, and a gully between strip and wall that does not exceed 3/8 inch.

Over ceramic tile, nails will not hold, so strips have to be adhesive anchored, surface finishes removed, the surface abraded, and grout lines filled flush. Over radiant heat, fastening switches to a manufacturer approved adhesive with no nails or screws at all.

The Height Problem Nobody Budgets For

With flooring over existing floors, the technical yes is only half the answer. A room can pass every bond and flatness check and still fail on clearance. The appliance that gets trapped is usually the dishwasher: another 3/8 inch of floor can wedge it under the countertop with no way to pull it out for service without cutting the new floor.

Assembly Built Over An Existing Floor Typical Added Height What It Usually Affects First
Floating rigid core LVP, 4 to 8 mm plank with attached pad 3/16 to 3/8 inch Interior door bottoms, appliance toe kicks
Floating laminate, 8 to 12 mm plank with 2 to 3 mm underlayment 3/8 to 5/8 inch Interior doors, dishwasher removal clearance
Tile over tile, 3/8 to 1/2 inch tile plus mortar bed 1/2 to 3/4 inch Dishwasher, exterior thresholds, stair risers
Carpet and pad over a hard surface 3/8 to 5/8 inch Door bottoms, transitions to adjoining rooms
Nail down solid hardwood over existing hardwood 3/4 inch Exterior doors, stair risers, cabinet toe kicks

Added height is measured against the existing finished floor, not the subfloor.

Floating rigid core LVP, 4 to 8 mm plank with attached pad
Typical Added Height3/16 to 3/8 inch
What It Usually Affects FirstInterior door bottoms, appliance toe kicks
Floating laminate, 8 to 12 mm plank with 2 to 3 mm underlayment
Typical Added Height3/8 to 5/8 inch
What It Usually Affects FirstInterior doors, dishwasher removal clearance
Tile over tile, 3/8 to 1/2 inch tile plus mortar bed
Typical Added Height1/2 to 3/4 inch
What It Usually Affects FirstDishwasher, exterior thresholds, stair risers
Carpet and pad over a hard surface
Typical Added Height3/8 to 5/8 inch
What It Usually Affects FirstDoor bottoms, transitions to adjoining rooms
Nail down solid hardwood over existing hardwood
Typical Added Height3/4 inch
What It Usually Affects FirstExterior doors, stair risers, cabinet toe kicks

Four Clearances To Measure Before Anyone Quotes You

  • Dishwasher opening. The standard undercounter cavity is 24 inches wide by 34 to 36 inches high by 24 inches deep. Raising the floor eats that vertical allowance directly, and ranges and refrigerators on slides have the same exposure.
  • Door swing. Interior doors and bifolds can usually be undercut. Exterior doors and their thresholds often cannot, because the weatherstripping and sill have no adjustment left.
  • Stair risers. IRC section R311.7.5.1 caps riser height at 7 3/4 inches and limits the tallest riser in a flight to no more than 3/8 inch above the shortest. Raising a landing or an upper floor surface changes one riser only. A 1/2 to 3/4 inch tile buildup breaks that limit by itself and creates both a code problem and a trip hazard.
  • Transitions to adjoining rooms. A floor that is now proud of the room next door needs a reducer or T molding rather than a flush transition, which is a visible design decision, not just a technical one.
Metal threshold strip where tile flooring meets wood flooring at a doorway

When Tearing Out Beats Building Up

Installing over existing floors is faster and less disruptive, and when it is allowed it is usually the right call. These are the conditions where our crews recommend removal even though covering is technically possible.

Cover It When Going over existing floors works when the old floor is fully bonded, within flatness tolerance, and the room has the vertical room to spare. Covering sound ceramic with rigid core LVP is the cleanest example: no demolition dust, no debris hauling, and the tile keeps doing its job as a rigid layer underneath.
Remove It When The Height Fails If the added height traps an appliance, blocks an exterior door, or pushes a stair riser past the 3/8 inch IRC variation limit, height wins the argument. Taking out 1/2 inch of old tile to recover the clearance is a smaller job than modifying cabinetry, doors, or a staircase.
Remove It When The Slab Has Not Been Tested An existing floor can hide a moisture problem, and testing a slab requires access to it. ASTM F2170 places probes at 40 percent of slab depth with a 24 hour equilibration, three holes for the first 1,000 square feet and one more per additional 1,000. Manufacturer limits in this category run 5 to 8 pounds by ASTM F1869 and 85 to 90 percent relative humidity by F2170.
Never Cover, Regardless Of Convenience Carpet and pad. Existing cushion backed or perimeter glued sheet vinyl. An existing floating laminate or LVP floor. More than one existing layer of resilient flooring. Any substrate the product’s own instructions exclude, because that exclusion is what the Go Flooring installation warranty is written against.

Questions About Flooring Over Existing Floors

Can you install LVP over ceramic tile?

Yes, in most cases. The tile must be fully bonded, sound, dry, and within the flatness tolerance in the product instructions. Rigid core vinyl commonly runs over grout joints up to 1/4 inch wide, with wider joints filled flush using a cementitious patching compound. Loose or hollow tiles must be removed or re-set first.

Do you have to remove old flooring before installing new flooring?

Not always. Well bonded ceramic tile, sound hardwood, and one fully adhered layer of existing sheet vinyl can usually stay. Carpet and pad, cushion backed sheet vinyl, and existing floating floors always come out. The deciding factors are whether the old floor is stable and non compressible, and whether the added height still clears doors, appliances and stairs.

Can you install laminate over an existing laminate floor?

No. Manufacturers list floating floors and laminate on their non approved substrate lists and direct installers to remove them first. A floating floor moves independently, so stacking a second floating system on it creates compound movement that overstresses the new floor’s locking joints. The existing laminate has to come out, which is the easiest tear out in the category.

Can you put new flooring over carpet?

No. Rigid core instructions state that installation is not allowed over any type of carpet, and manufacturers list carpeting and carpet pad as non approved substrates. Carpet and pad compress under load by design, which flexes any floor installed above them until the joints or the bond fail. Carpet, pad and tack strip all come out.

Can you tile over existing tile?

Yes, where there is no floor height or wall thickness limitation and the existing tile is well bonded. The Tile Council of North America covers this in Handbook methods TR712 and TR713 and recommends a bond test first, because not all thin sets bond to a glazed surface. Mechanical or chemical abrasion is often required, and the framing must meet L/360 deflection.

How much height does new flooring add over an existing floor?

Floating rigid core LVP adds roughly 3/16 to 3/8 inch. Floating laminate with underlayment adds 3/8 to 5/8 inch. Tile over tile adds 1/2 to 3/4 inch once the mortar bed is counted. Nail down solid hardwood over existing hardwood adds a full 3/4 inch. Measure dishwasher, door and stair clearances before committing.

What if my old vinyl floor might contain asbestos?

Presume it does until testing says otherwise. Vinyl asbestos tile, asphalt tile, sheet vinyl backing felt and black cutback adhesive can all contain asbestos. The EPA notes that material in good condition and left undisturbed generally does not release fibers, and advises installing new floor covering over it where possible. Do not sand, scrape or power strip it. Have it sampled by an accredited professional.

Does installing over an existing floor void the flooring warranty?

It does when the substrate is not approved. Manufacturer warranties exclude installations made contrary to the written instructions furnished with the product, along with deficiencies tied to subfloor preparation and deflection. Installing over carpet, an existing floating floor, cushion backed sheet vinyl, or a substrate outside flatness or moisture limits will void coverage even if the floor looks correct.

Get A Straight Answer On Your Floor

Book A Free In-Home Consultation

Go Flooring serves North Carolina, South Carolina, Georgia, Florida, Alabama, Michigan, Indiana and Ohio. A consultant evaluates the existing floor in person, tells you whether it stays or goes, and brings samples of hardwood, laminate, LVP, tile and carpet to your kitchen table.

  • A+ BBB Rated
  • 4.8 Star Google Average
  • Install As Fast As Tomorrow
Call 844-466-0293

Why Homeowners Trust Go Flooring

A+ BBB Rated 4.8 Google Average 2026 Gold Titan Award Lifetime Installation Warranty

Brooke Davis